Dear Friends

We would like to offer for loading until December 125 t. of DRYINC© EAGLE Copper from incineration.

The deliveries is a mix of the two qualities in size from +19 mm.

Cu content from melting reports varies between 93-97%

Answer latest on Wednesday the 21st

responsible seller:
Jesper Dueholm
jvm@scanmetals.com

We would like to offer for loading until December 475 t. of DRYINC©HAWK Brass from incineration.

425 tons is a mix of three qualities. Please see photo attached
1. DRYINC©BABYHAWK 10-19 mm
2. DRYINC©JUNIORHAWK 19-32 mm
3. DRYINC©SENIORHAWK 32-60 mm

Incinerated DRYINC©BRASS in average:
Cu 61-63%
Pb ~2
Ni 0,3-0,5
Sn 0,3-0,5
Al <0,5
Fe 0,3
Si <0,05
free from organic material
50 tons DRYINC©MINIHAWK 5-10 mm. please see photo attached
Analysis same as above but with slighter higher Alu and Pb.

Answer latest on Wednesday the 21st

responsible seller: jvd@scanmetals.com

Please find below our offer for loading during September and October!
We will sell the material during next week. Your offers are welcome any day between
Friday 28th of August and Friday 4th of September



The material originating from incineration is branded as DRYINC©

Size 10-60mm DRYINC©LION / LION QUEEN and LION KING…………………..1800MT

DRYINC©LION +10 mm est. MY 82-84%
Al Balance, Si between 1,5-2,5%, approx. Fe 0,5-0,9% Cu 0,4%-0,9% Mn 0,3%, Mg 0,3%, Zn 0,5%-0,8% Others Total 0,1%
https://www.youtube.com/watch?v=DkVtKRcK4N8


DRYINC©LION QUEEN +10 mm est. >MY 82-84%
Al Balance, Si between 0,5-1,0%, approx. Fe 0,4%, max 0,5% Cu 0,2%, Mn 0,3%, Mg 0,3%, Zn 0,15%, Others 0,1%
https://www.youtube.com/watch?v=XFWUMIr525E


DRYINC©LION KING +10 mm est. >MY 82-84%
Al Balance, Si between 2,0-2,5%, approx. Fe 0,9%, Cu 1,9%, Mn 0,25%, Mg 0,3%, Zn 1,0%, Others 0,1%
https://www.youtube.com/watch?v=JS3X49X7D1g






Size 5-10mm DRYINC©TIGER / TIGER QUEEN and TIGER KING…………………..750MT

DRYINC©TIGER 5-10 mm est. MY 76-78%
Al Balance, Si between 0,8-1,0%, approx.: Fe 0,6%, Cu 0,6%, Mn 0,3%, Mg 0,3%, Zn 0,5%, Others Total 0,1%
https://www.youtube.com/watch?v=rSH60UzgwTY


DRYINC©TIGER QUEEN 5-10 mm est. MY 76-78%
Al Balance, Si between 0,5-0,8%, approx.: Fe 0,4-0,7%, Cu 0,15-0,20%, Mn 0,4%, Mg 0,1%, Zn 0,2-0,4%, Others Total 0,2
https://www.youtube.com/watch?v=rSH60UzgwTY


DRYINC©TIGER KING 5-10 mm est. MY 76-78%
Al Balance, Si between 1,2-2,0%, approx.: Fe 0,7-0,9%, Cu 0,9-2,2%, Mn 0,3%, Mg 0,1%, Zn 0,9-2,2%, Others Total 0,2
https://www.youtube.com/watch?v=rSH60UzgwTY



Size 2-5mm DRYINC©WOLF……………………………………………………….……..700MT

DRYINC©WOLF 2-5 mm est. MY 69-71%
Al Balance, Si between 0,8-1,0%, approx.: Fe 0,7%, Cu 0,5%, Mn 0,3%, Mg 0,3%, Zn 0,4%, Others Total 0,1%
https://www.youtube.com/watch?v=oBD-I4Hj9V4



Size <2mm DRYINC©FOX……………………………………………………….….……..250MT

DRYINC©FOX 0-2mm est. MY 62-64%
Al Balance, Si between 0,5-0,7%, approx.: Fe 0,7%, Cu 0,2%, Mn 0,4%, Mg 0,05%, Zn 0,2%, Others Total 0,1%
https://www.youtube.com/watch?v=UbXnEsscNqc



Bales 400 X 300 X ~400mm DRYINC©LYNX………………………………………………300MT

Al 95,39 Cu 1,69 Mg 0,0 Si 0,63 Fe 0,69 Mn 0,51 Ni 0,02 Zn 0,95 Pb 0,04 Last reported
400x300x~400mm bales with thin walled aluminium from incineration.
Packed on pallets 1200x1200mm around 2100kg.






Material originating from shredding is branded as DRYMILL©
These are the latest and most trustworthy smelting report we have.
As time goes by we will be able to confirm the analysis better. Hope for your
understanding in this.


10-40mm DRYMILL©PUMA KING ………………………………………………………….200MT
Si 8,5…Fe 0,8…Cu 3,0…Mn 0,2…Mg 0,01…Zn 1,6…Pb 0,14…Al 85-86%...others 0.2
MY est. 89-91%


10-40mm DRYMILL©PUMA QUEEN 10-60mm …………………………………………….100MT
Si 3,5…Fe 0,4…Cu 0,85…Mn 0,3…Mg 1,0…Zn 0,75…Al 93%...others 0.2
MY est 89-91%




responsible seller: hl@scanmetals.com

Brass from incineration and new dry processed qualities from shredder

400 MT Brass from Scanmetals production of incinerated metals
50 MT Brass from shredder

We would like to offer Brass for loading in September and October.
Please offer before Tuesday 1st of September

Please send answer to both Håkan and Jesper, thank you!

Incinerated DRYINC©BRASS in average:
Cu 61-63%
Pb ~2
Ni 0,3-0,5
Sn 0,3-0,5
Al <0,5
Fe 0,3
Si <0,05
free from organic material

• 125 MT DRYINC©MINI HAWK 5-10mm
• 125 MT DRYINC©BABY HAWK 10-19mm
• 50 MT DRYINC©JUNIOR HAWK 19-32mm
• 100 MT DRYINC©SENIOR HAWK 32-60mm


Shredded DRYMILL©BRASS

• 25 MT DRYMILL©MINI HAWK 5-10mm
• 25 MT DRYMILL©BABY HAWK 10-19mm
not yet smelted, see photos.
our estimation…..same as incinerated…your???


Med venlig hilsen / Best regards

Jesper Vinther Dueholm jvd@scanmetals.com
and Håkan Larsson hl@scanmetals.com

We would like to present our new qualities of aluminium originating from shredders.

Brand name is DRYMILL© indicating that we process material without water.
Quality name is PUMA. We sell 2-5, 5-10 and 10-60mm. During August, quantities
will not be huge and mainly for inviting our customers to have samples.
Size 10-60mm is sold with two specifications. Estimated MY 85-90%

PUMA KING 10-60mm PUMA QUEEN 10-60mm
See photo for latest specification report


The smaller sizes below 10mm will be higher in copper and lower in MY
Qualities have not yet been smelted and analyzed.

On offer in total for September delivery:

PUMA KING 10-60mm 100MT Photo 1 2 3 and 10 (specification)
PUMA QUEEN 10-60mm 50MT Photo 4 5 and 10 (specification)
PUMA 5-10mm 15MT Photo 6 7
PUMA 2-5mm 10MT Photo 8 9


responsible seller: hl@scanmetals.com

We would like to offer for August delivery.
An answer within this week would be appreciated.

150 MT DRYINC©JUNIOR EAGLE 19-32mm
Estimated Cu content 95-96%

150 MT DRYINC©SENIOR EAGLE 32+mm
Estimated Cu content 93-94%

Please welcome Jesper V. Dueholm, jvd@scanmetals.com.
Jesper will handle this sale. Please send your answers and questions to
him. +4524509009

responsible seller: jvd@scanmetals.com

Dear customers,

I would like you to take a look at the stainless and CuNiZn offers of today.
Materials are ready to be loaded.

I would also like you to welcome my old colleague mr Jesper Vinther Dueholm jvd@scanmetals.com who now
will become more and more involved in and responsible for the sales of heavy non-ferrous grades like clean products
of copper, brass, zinc and stainless but also Zuriks and Zorbas when available.

Your answers and questions to both of us, thank you!

We would like to offer for August loading:

From Scanmetals Germany
50MT DRYINC©Degoat 35-60mm
SS 89,37%...Br 5,62%...Cu 2,41%...Others 2,60%

From Scanmetals Denmark
25 MT DRYINC(c)BUFFALO 10-60mm
Smelters reports: Ni 6,5 - 7,6...Cr 14,2-15,4…Mn 1,9-2,4…Cu 0,8-2,7…Mo 0,5-0,8 balance Fe
and
50MT COINS
Cu 81-83…Ni 11-13…Sn 0,5…Pb 0,02…Zn 4-5



From Scanmetals England
45MT DRYINC©LAMB 10-60mm from UK
SS 89% (316/301/304/321 49%, 202/430 40%),
Cu+Brass+coins 6%, other nf metals 1%, Fe 0,5%, Waste 2,5%
and
55MT HANDPICKED RAM >60mm from UK
SS 94% (301/304/321 42%, 202/430 52%),
Cu+Brass+coins 1%, other nf metals 1,5%, Fe 0,5%, Waste 3%

responible sellers:
jvd@scanmetals.com and hl@scanmetals.com

a) 25-40MT Handpicked Demolition scrap and
b) 10MT Handpicked Incinerated Copper/Brass

We would like to offer some handpicked scrap

a) 25-40MT of separated heavy metals from demolition. See specification below.

b) 10MT of Copper pipes with brass fittings from incineration.

Please offer before Friday 17th and preferably with a pricelist for adjustment.

Last handpicking result of
a).....Brass 64,9%...Copper 11,4%...Aluminium 14,9%...Zinc 7,9%...Waste 1,0%

b).....How much brass and copper there is in the complex Cu/Brass material I can only guess.
I presume however that this is well known by any hand sorting operation.

responsible seller hl@scanmetals.com

Dear friends,
as our production doesn´t stop we now offer material for loading until end September.
Please answer with your holiday stops for better planning, thank you!

we would like to offer aluminium to bridge the temporary stop as well as the summer holidays.
Thus we open up for orders until August. The quantities to be delivered are split between months
as per our best knowledge.


Prices welcome as from now until latest Friday 17th of July.



Size 10-60mm DRYINC©LION / LION QUEEN and LION KING…………………..1600MT

DRYINC©LION +10 mm est. MY 82-84%
Al Balance, Si between 1,5-2,5%, approx. Fe 0,5-0,9% Cu 0,4%-0,9% Mn 0,3%, Mg 0,3%, Zn 0,5%-0,8% Others Total 0,1%
https://www.youtube.com/watch?v=DkVtKRcK4N8

DRYINC©LION QUEEN +10 mm est. >MY 82-84%
Al Balance, Si between 0,5-1,0%, approx. Fe 0,4%, max 0,5% Cu 0,2%, Mn 0,3%, Mg 0,3%, Zn 0,15%, Others 0,1%
https://www.youtube.com/watch?v=XFWUMIr525E

DRYINC©LION KING +10 mm est. >MY 82-84%
Al Balance, Si between 2,0-2,5%, approx. Fe 0,9%, Cu 1,9%, Mn 0,25%, Mg 0,3%, Zn 1,0%, Others 0,1%
https://www.youtube.com/watch?v=JS3X49X7D1g





Size 5-10mm DRYINC©TIGER / TIGER QUEEN and TIGER KING…………………..700MT

DRYINC©TIGER 5-10 mm est. MY 76-78% 200MT for July
Al Balance, Si between 0,8-1,0%, approx.: Fe 0,6%, Cu 0,6%, Mn 0,3%, Mg 0,3%, Zn 0,5%, Others Total 0,1%
https://www.youtube.com/watch?v=rSH60UzgwTY

DRYINC©TIGER QUEEN 5-10 mm est. MY 76-78%
Al Balance, Si between 0,5-0,8%, approx.: Fe 0,4-0,7%, Cu 0,15-0,20%, Mn 0,4%, Mg 0,1%, Zn 0,2-0,4%, Others Total 0,2
https://www.youtube.com/watch?v=rSH60UzgwTY

DRYINC©TIGER KING 5-10 mm est. MY 76-78%
Al Balance, Si between 1,2-2,0%, approx.: Fe 0,7-0,9%, Cu 0,9-2,2%, Mn 0,3%, Mg 0,1%, Zn 0,9-2,2%, Others Total 0,2
https://www.youtube.com/watch?v=rSH60UzgwTY


Size 2-5mm DRYINC©WOLF……………………………………………………….……..500MT

DRYINC©WOLF 2-5 mm est. MY 69-71%
Al Balance, Si between 0,8-1,0%, approx.: Fe 0,7%, Cu 0,5%, Mn 0,3%, Mg 0,3%, Zn 0,4%, Others Total 0,1%
https://www.youtube.com/watch?v=oBD-I4Hj9V4


Size <2mm DRYINC©FOX……………………………………………………….….……..100MT

DRYINC©FOX 0-2mm est. MY 62-64%
Al Balance, Si between 0,5-0,7%, approx.: Fe 0,7%, Cu 0,2%, Mn 0,4%, Mg 0,05%, Zn 0,2%, Others Total 0,1%
https://www.youtube.com/watch?v=UbXnEsscNqc





Remember, we also sell copper and zinc granules for alloying purposes.
Material can be delivered in single bigbags (1,2MT) together with our aluminium.


responsible seller: hl@scanmetals.com

550 MT Brass from Scanmetals production of incinerated metals

We would like to offer 550 MT Brass ex incineration for loading in June, July and August.
Please offer before Wednesday 10th of June



BRASS in average:
Cu 61-63%
Pb ~2
Ni 0,3-0,5
Sn 0,3-0,5
Al <0,5
Fe 0,3
Si <0,05


• 125 MT DRYINC©MINI HAWK 5-10mm JUNE 50…JULY 50…AUGUST 25

• 175 MT DRYINC©BABY HAWK 10-19mm JUNE 50…JULY 75…AUGUST 50

• 150 MT DRYINC©JUNIOR HAWK 19-32mm JUNE 75…JULY 25…AUGUST 50

• 100 MT DRYINC©SENIOR HAWK 32-60mm JUNE 25…JULY 50…AUGUST 25

• 25 MT Handpicked Oversize HAWK >60mm JULY 25


Med venlig hilsen / Best regards

Håkan Larsson
HL@SCANMETALS.COM